7 Smart Float Switches and Water Level Sensors which help you in saving water.

Introduction
A Float Level Switch is a device which detects the level of water or any liquid in a storage container.
It is frequently used as an alarm to indicate the desired level of water or liquid. Also, it can be used as a switch to control a pump also know as Water level sensor.
Level sensors also detect the level of liquids inside a container like a float switch. They contain some sort of a built-in electronic or mechatronic system which either monitors level of liquid within a particular range or at a particular point.
As any liquid material flows horizontally due to gravity within containers, sensors can be used at specific locations or range to monitor the rise of level of liquid.
Mostly, these level sensors are used as a trigger to direct an action when a particular condition is fulfilled eg. When a water tank is full, this water level sensor may trigger the turning OFF of pump, automatically draining out liquid once it has surpassed any limit etc.
These float switches and water level sensors have applications which include remote locations which are dangerous and difficult for human beings to commute, underground sumps and tanks which cannot be monitored regularly, at urban homes where optimum consumption of water is important due to shortage in supply of water etc.
1. DC 220V Liquid Water Level Sensor Right Angle Float Switch for Fish Tank: KG529:
  • Technical Specifications:
  • Cable Length: 37.5cm
  • Max Breakdown Voltage: 220V DC
  • Max Switching Voltage: 100V DC
  • Maximum Switching Current: 0.5 A
  • Max Load Current: 1.0 A
  • Max Contact Resistance: 100 mΩ
  • Temp Rating: -10~+85°C
  • Installation: top or bottom mounted vertically
  • Use medium: water, oil, chemical medium
  • Pressure range: 0.2MPa
 To buy this product, please visit www.kitsguru.com or click on the link:
2. Float level switch, Water level sensor, for Water Level Controller: KG201
  • Technical Specifications:
  • Contract rating (Max): 10W
  • Switching voltage (Max): 110VDC
  • Switching current (Max): 0.5A
  • Breakdown voltage (Max): 220VDC
To buy this product, please visit www.kitsguru.com or click on the link:
3. Float level switch, Water level sensor, for Water Level Controller (ZPC5 High Pressure): KG447
  • Technical Specifications:
  • Float level switch, Water level sensor, for Water Level Controller (ZPC4 High Pressure)
  • Side mounting
  • Efficient sensor stems
  • Encapsulate permanent magnets
 To buy this product, please visit www.kitsguru.com or click on the link:
4. Float level switch, Water level sensor, for Water Level Controller (ZPC5 Low Pressure): KG446
  • Technical Specifications:
  • Float level switch, Water level sensor, for Water Level Controller (ZPC4 High Pressure)
  • Side mounting
  • Efficient sensor stems
  • Encapsulate permanent magnets
 To buy this product, please visit www.kitsguru.com or click on the link:
5. Float level switch, Water level sensor, for Water Level Controller (ZPC6 Low Pressure): KG448
  • Technical Specifications:
  • Float level switch, Water level sensor, for Water Level Controller (ZPC4 High Pressure)
  • Side mounting
  • Efficient sensor stems
  • Encapsulate permanent magnets
 To buy this product, please visit www.kitsguru.com or click on the link:
6. Float level switch, Water level sensor, for Water Level Controller (ZPC4 High Pressure): KG445
  • Technical Specifications:
  • Float level switch, Water level sensor, for Water Level Controller (ZPC4 High Pressure)
  • Side mounting
  • Efficient sensor stems
  • Encapsulate permanent magnets
 To buy this product, please visit www.kitsguru.com or click on the link:
7. Level switch Liquid level sensor Liquid level controller Plastic ball float: KG539
  • Technical Specifications:
  • Max Contact Rating :10W
  • Max Switching Voltage:220V
  • Max Switching Current:0.5A
  • Max Breakdown Voltage:220VDC
  • Max Carry Current:1.0A
  • Max Contact Resistance:100mohm
  • Temperature Rating:-10~+60
  • Float Ball Material: P.P
  • Float Body Material: P.P
 To buy this product, please visit www.kitsguru.com or click on the link:
Industries Used:
  • Oil/Water Separators
  • Waste Water Treatment Equipment
  • Diesel Fuel /Oil tank and Transfer Systems
  • Fuel Management
  • Chemical Processing and Storage
  • Freon Recovery
  • Lubrication Equipment
  • Fluid Power
  • Heating Ventilation and Air Conditioning
  • Marine Applications
  • Medical Equipment
  • Food Processing Equipment
  • Heavy Construction Equipment
Applications
  • Regulate single and multiple levels detection
  • Low level sensing and alarm
  • High level sensing and alarm
  • Leak Detection
  • Overfill shut off
  • Temperature and Level Control

Comments

Post a Comment

Popular posts from this blog

MAX3232-RS232 Serial Port To TTL Converter Module DB9 Connector 5V, RS232

Image
Introduction to MAX3232RS232 Serial Port To TTL Converter Module DB9 Connector 5V, RS232 Max-232 is an integrated circuit, used to convert serial data from RS-232 standard to TTL standard. There are three main points to understand while using the module. One is serial data (Serial Communication) , Second one is RS232 standard and third one is TTL standard . Serial communication Embedded electronics is all about interlinking circuits (processors or other integrated circuits) to create a symbiotic system. In order for those individual circuits to swap their information, they must share a common communication protocol. Hundreds of communication protocols have been defined to achieve this data exchange, and, in general, each can be separated into one of two categories: parallel or serial. In telecommunication and data transmission, serial communication is that the method of sending information one bit at a time, consecutive, over a communicating or laptop bus. this can be in
Read more

B.Tech and M.Tech Projects for Engineering Students in India 2017-18 Edition

Best B.Tech and M.Tech Projects for Engineering Students in India Every graduation goes with the practical as well as with the theoretical practice of knowledge. Academic project work is an important task for any engineering student and the student should apply all his core knowledge and skill to his project. But sometimes it is very necessary to have some guidelines to build a powerful project. Today, we are here with a list of some free projects which would be helpful for  B.tech and M.tech Engineering Students in India . But now, people have started using it as a business, they are demanding for much amount of money for providing the students with their engineering project. So, this is leading with much economical issue to the engineering students. Therefore, with much research and analysis, some free projects have been listed for B.Tech and M.Tech students. Let us have a look on them: B.Tech Projects  Many websites provide you downloads for projects for different str
Read more